TACO Marine | Vinyl Molding TACO Marine

Vinyl Trim & Molding longer than 8' is subject to $400 shipping*. Avoid $400 shipping with cut lengths.**

Beautifully finish raw fiberglass or wood edges with our Rigid Vinyl Moulding – ideal for cabin doors, hulls and decks.

*Shipping long lengths of Vinyl Trim & Molding greater than 8' that cannot be coiled requires a special freight carrier. The $400 shipping rate cannot be waived and is automatically applied to any order on long length Vinyl Trim & Molding. We can only ship long lengths to select locations in the Continental United States. Click here for a service map.

** Cutting long length extrusions of Rigid Vinyl, Stainless Steel or Aluminum to below 8' allows TACO to ship anywhere. Orders $99 and above receive free shipping in the Continental United States. Cuts may not be exact, as we try to avoid cutting through pre-drilled holes. Cut lengths are not eligible for returns.

View as Grid List

Display per page

TACO Marine, trim and molding, vinyl molding, V25-0240, Angle Molding, render

27/32" x 27/32" Angle Molding

$60.00

TACO Marine, trim and molding, vinyl molding, V25-0474, 1-1/8’’ x 3/8’’ Edge Molding, render

1-1/8’’ x 3/8’’ Edge Molding

$120.00

TACO Marine, trim and molding, vinyl molding, V25-0786BKA12, 13/16’’ x 5/16’’ Edge Molding, render

13/16’’ x 5/16’’ Edge Molding

$50.00

TACO Marine, trim and molding, vinyl molding, V25-9124BKA14D, 9/16’’ x 1/4’’ Angle Molding, render

9/16’’ x 1/4’’ Angle Molding

$50.00

TACO Marine, trim and molding, vinyl molding, V25-9519WHA10, 1-1/4" x 3/4" Angle Molding, render

1-1/4" x 3/4" Angle Molding

$30.00

TACO Marine V15-9779WHC50 Flexible Edge Molding front render

1" X 5/32" Flexible Edge Molding

$429.99

TACO Marine, trim and molding, vinyl molding, V25-9543NAT10, Hull Stiffener, render

Hull Stiffener

$30.00

FOLLOW US ON INSTAGRAM @TACOMARINE