electronics-gs-900-p

Grand Slam 900-P Masthead Stern Light

GS-900-P

The Grand Slam 900-P Masthead Stern Light was created specifically for the safety and convenience of today’s boater. Ideal for powered vessels 39.4’ to 65.7' (12 to 20 meters), the GS-900-P is certified for USCG-required 3 nautical miles as a 225º steaming light, 3 nautical miles as a 360º all-around light, and 2 nautical miles as a 135º stern light. The GS-900-P allows boat operators to lift and descend this navigational requirement from the safety of the deck, right under the top and without ever having to climb on the gunnel again. Simply flip the crank handle to the extended position and rotate the light to the upright location or back to its stowed, towing spot. The light runs on 12 volts and consists of four 3-watt LED Cree chips driven by two Mean Well drivers. Its smooth operation, attractive machined, anodized aluminum housing and cast stainless-steel rotator make this item a must for any boater. 

Features and Benefits

  • For boats 12 meters (39.4') to 20 meters (65.7')
  • Meets USCG 3nm 225° Steaming Light requirements
  • Meets USCG 3nm 360° All-Around Light requirements
  • Meets USCG 2nm 135° Stern Light requirements
  • Meets NMMA/ABYC C-5 5.8 Standards requirements
  • NMMA type accepted approved product
  • Machined / bright dipped anodized aluminum housing with a brushed finish 
  • Includes tube, masthead light, stern light and 6” lead of 20-gauge wire from the base
  • 12-volt DC power supply for light function  
  • Safe, no-hassle raising and lowering of a masthead anchor light
  • Standard 1"-14 thread (male) shaft 
  • Water-resistance IP66 rating
  • Sealed piston
  • Polished Type-316L stainless steel crank handle and rotator
  • Folding crank handle locks flush into base
  • Threaded shaft for consistent, easy lift and descent
  • Delrin bearings for smooth operation
  • Roller bearings in crank assembly
  • Mounts through up to 2" thick hardtops
  • Includes 4" x 1/4" round backing plate (hardware not included)
  • Pairs with 6º Wedge Plate (WP-800-900), which is sold separately
  • Made in the USA
  • 3-year limited warranty on mechanical
  • 1-year limited warranty on electrical

The compliance date for ABYC A-16, Installation of Electric Navigation Lights, and C-5, Construction and Testing of Electric Navigation Lights, went into effect on August 1, 2023. All TACO Marine Navigation, Masthead, and All-Around Lights meet the requirements set forth and are approved under the NMMA Type Accepted Agreement.  Additionally, all TACO Marine Navigation Lights have always used LED Cree chip technology. Please see below for documented approval of the required testing:

  • C-5 Testing
  • All-Around (F38-9000 Root Part Number)
  • Component ID 2619819
  • For certification inquiries, please visit nmma.org
  • C-5 Compliant
  • Navigation Lights (Side Lights)
  • Component ID 2619788
  • For certification inquiries, please visit nmma.org
  • PRODUCT DETAIL
  • SPEC SHEET
  • VIDEO
  • Feedback
Part NumberDescription
GS-900-PGrand Slam 900-P Masthead Stern Light

FOLLOW US ON INSTAGRAM @TACOMARINE