What is the TACO Marine Outrigger Line Caddy?

TACO’s Outrigger Line Caddy is designed to eliminate tangled rigging. The Outrigger Caddy fits 1-1/2" and 1-1/8" poles.

Installation

To install on 1-1/2" poles:

• Place the rings over the outrigger pole with the bottom clamp 6" above the outrigger mount with the wrapping pin facing the outrigger butt.
• Place the second ring approximately 12" up the pole with the wrapping pin pointing toward the outrigger tip and tighten the mounting bolts.

To install on 1-1/8" poles:

• Install the rubber inserts provided and proceed as above.